fbpx

Ramp N Clamp models

Ramp N Clamp Models

Once you have checked the boat latch compatibility page, and you know the latch will work, now you need to know which model to get. Knowing which model you need is extremely simple. Just look at the eye of the boat and see if there is a mounting bracket or not. Below are easy to follow photos of bow eyes and mounting brackets. Match up the photo with your eye and that’s your model. It’s that simple. **Please note, The sport model works on 95% of boats.

Sport Model

Ramp N Clamp sport model

The Sport works with a standard U bolt direct mount. SEE BELOW

Ramp N Clamp sport model Ubolt
Ramp N Clamp sport model U bolt
RNC Common On fiberglass
RNC Handle

Model L

Ramp N Clamp model L

Model L works with a U bolt that has a thick mounting plate. SEE BELOW

Ramp N Clamp model L thick
Ramp N Clamp model L thick
Ramp N Clamp model L common
RNC Handle

Model T

Ramp N Clamp model T

Model T works with this exact Aluminum Eye. SEE BELOW

Aluminum Eye
Aluminum eye adaptor
RNC Common On Tracker
RNC Handle

Ramp N Clamp Handle Options

Long Handle Option

Ramp N Clamp Long Handle

The Long Handle Highlights

  • Very commonly used on roller trailers.
  • Automatically resets after loading and unloading.
  • Made of Aluminum to help prevent corrosion and rust.
  • Easy to reach from inside the boat for launching.
  • Easy to add a rope to launch from inside the boat.
  • MUST float the boat then pull handle to release the boat. (short handle has an option to manually release at anytime)
  • LONG HANDLE MODEL CAN NOT BE CONVERTED TO SHORT HANDLE MODEL

Short Handle Option

Ramp N Clamp Short Handle

The Short Handle Option 2 Highlights

  • Very commonly used on bunk trailers.
  • Automatically resets after loading and unloading.
  • Made of Stainless Steel to help prevent corrosion and rust.
  • Low profile for less bulk.
  • Very little force to open.
  • MUST float the boat then pull handle to release the boat. (option 1 short handle can manually release at anytime)
  • SHORT HANDLE MODEL CAN NOT BE CONVERTED TO LONG HANDLE MODEL

The Short Handle Option 1 Highlights

  • Very commonly used on bunk trailers.
  • Manually reset after loading and unloading.
  • Made of Stainless Steel to help prevent corrosion and rust.
  • Low profile for less bulk.
  • Very little force to open.
  • Can place handle in the up or “release position” to keep the clamp open for launching. You do not have to float the boat to release. If you prefer to unhook your strap and chain and release the clamp at the same time, you can with this option. You must manually place the handle in the down or “locking” position before loading the boat.
  • SHORT HANDLE MODEL CAN NOT BE CONVERTED TO LONG HANDLE MODEL