Sport Model Ramp N Clamp

SPORT MODEL Boat2Trailer Latch

Sport Model Ramp N Clamp EYEThe Sport Model is designed specifically to work with a boat that has a standard U Bolt mounted directly to the boat and no thick brackets above it. The Sport Model is for ALL FIBERGLASS BOATS and a LARGE percentage of aluminum compatible boats. The polyurethane is engineered to fit snug around the eye of the boat and create the tightest fit between your eye and your boat. When you create a tight fit this allows the least amount of play when loading and traveling. This is extremely important when it comes to fiberglass boats. You do NOT want a loose fit or it will create pressure points or damaging wear points on the fiberglass. Our design helps to combat this issue and protect your boat.

Sport Model Ramp N Clamp Sm
Sport Model Ramp N Clamp Fiberglass
Sport Model Ramp N Clamp Aluminum Boat
Boat2Trailer Compatibility Page

Short Or Long Handle?

Long Handle

Ramp N Clamp Long Handle Inside
Tracker automatic boat latch Long Handle

The Sport Model Long Handle Highlights

  • Very commonly used on roller trailers.
  • Automatically resets after loading and unloading.
  • Made of Aluminum to help prevent corrosion and rust.
  • Easy to reach from inside the boat for launching.
  • Easy to add a rope to launch from inside the boat.
  • MUST float the boat then pull handle to release the boat. (short handle has an option to manually release at anytime)
  • LONG HANDLE MODEL CAN NOT BE CONVERTED TO SHORT HANDLE MODEL

Short Handle

Ramp N Clamp Short Handle Float
Tracker automatic boat latch Short Handle

The Sport Model Automatic Handle Highlights

  • Very commonly used on bunk trailers.
  • Automatically resets after loading and unloading.
  • Made of Stainless Steel to help prevent corrosion and rust.
  • Low profile for less bulk.
  • Very little force to open.
  • MUST float the boat then pull handle to release the boat. (option 1 short handle can manually release at anytime)
  • SHORT HANDLE MODEL CAN NOT BE CONVERTED TO LONG HANDLE MODEL

The Sport Model Manual Handle Highlights

  • Very commonly used on bunk trailers.
  • Manually reset after loading and unloading.
  • Made of Stainless Steel to help prevent corrosion and rust.
  • Low profile for less bulk.
  • Very little force to open.
  • Can place handle in the up or “release position” to keep the clamp open for launching. You do not have to float the boat to release. If you prefer to unhook your strap and chain and release the clamp at the same time, you can with this option. You must manually place the handle in the down or “locking” position before loading the boat.
  • SHORT HANDLE MODEL CAN NOT BE CONVERTED TO LONG HANDLE MODEL
Sport Model Ramp N Clamp Sm