Model L Ramp N Clamp

Model L Boat2Trailer Latch

Model L Ramp N Clamp DetailsThe Model L is designed specifically to work with an aluminum boat that has a thick mounting plate directly above the eye. The polyurethane has a wide gap or channel for the thick plate to pass through. The Model L is for Aluminum LUND, ALUMACRAFT and any other aluminum boat that has this thick mounting plate. The polyurethane is engineered to fit snug around the mounting plate above the eye of the boat. This creates a tight fit between your eye and your boat. When you create a tight fit this allows the least amount of play when loading and traveling. This is extremely important when it comes to protecting the boat. You do NOT want a loose fit or it will create pressure points, bouncing or damaging wear points on the boat. Our design helps to combat this issue and protect your boat.

Model L Ramp N Clamp Sm
Model L Ramp N Clamp standard on
Boat2Trailer Compatibility Page

Long Or Short Handle?

Ramp N Clamp Long Handle Inside
Tracker automatic boat latch Long Handle

The Long Handle Highlights

  • Very commonly used on roller trailers.
  • Automatically resets after loading and unloading.
  • Made of Aluminum to help prevent corrosion and rust.
  • Easy to reach from inside the boat for launching.
  • Easy to add a rope to launch from inside the boat.
  • MUST float the boat then pull handle to release the boat. (short handle has an option to manually release at anytime)
  • LONG HANDLE MODEL CAN NOT BE CONVERTED TO SHORT HANDLE MODEL
Ramp N Clamp Short Handle Float
StingRay automatic boat latch Short Handle

The Automatic Handle Highlights

  • Very commonly used on bunk trailers.
  • Automatically resets after loading and unloading.
  • Made of Stainless Steel to help prevent corrosion and rust.
  • Low profile for less bulk.
  • Very little force to open.
  • MUST float the boat then pull handle to release the boat. (option 1 short handle can manually release at anytime)
  • SHORT HANDLE MODEL CAN NOT BE CONVERTED TO LONG HANDLE MODEL

The Manual Handle Highlights

  • Very commonly used on bunk trailers.
  • Manually reset after loading and unloading.
  • Made of Stainless Steel to help prevent corrosion and rust.
  • Low profile for less bulk.
  • Very little force to open.
  • Can place handle in the up or “release position” to keep the clamp open for launching. You do not have to float the boat to release. If you prefer to unhook your strap and chain and release the clamp at the same time, you can with this option. You must manually place the handle in the down or “locking” position before loading the boat.
  • SHORT HANDLE MODEL CAN NOT BE CONVERTED TO LONG HANDLE MODEL

Tips with the Model L

Model L Ramp N Clamp Sm