Ramp N Clamp Support & FAQ
Type your question below and we'll show you the best answer. Most questions are answered in seconds.
Best answer
We couldn't find an exact match
Try fewer or different words (for example "handle", "lock", or "Lund"), or reach out and we'll help.
Contact supportFit & Models
Answer the 8 quick questions in our compatibility check. If you can answer yes to every question, the Ramp N Clamp will work on your boat.
Some Mod V and jon boat hulls work and some don't, so run the check for those boats rather than guessing.
Want to see examples first? Browse our boat list. Still not sure? Send us your details.
The model you need depends on the type of bow eye on your boat.
| Model | Bow eye | Common boats |
|---|---|---|
| Sport Model | Standard U-bolt eye | Most fiberglass boats, including fiberglass Lund and Ranger, Sea Ray, Phoenix, Tahoe, Mako, Larson, Yamaha, Boston Whaler and Princecraft |
| Model LGEN2 | U-bolt eye with a rectangular mounting block at the base | Aluminum Lund and Alumacraft boats |
| RT Series | Thick aluminum bow eye | Tracker and Ranger aluminum boats, 2013–2025 (cleaner look) |
| Model T | Thick aluminum bow eye | Universal — every boat with an aluminum bow eye |
Not sure which eye you have? Step 2 of the compatibility check shows photos of each eye and matches you to the right model.
Look at the bow eye rather than the model year:
- Standard U-bolt eye (fiberglass Rangers and older aluminum boats) → Sport Model
- Thick aluminum bow eye → RT Series or Model T
The RT Series fits Tracker and Ranger aluminum eyes through 2025. 2026 and newer Ranger aluminum boats need the Model T.
Both fit the thick aluminum bow eye on Tracker and Ranger boats, and both include the stainless steel protector that goes on the aluminum eye.
- Model T — universal. Works on every boat with an aluminum bow eye (2013 and newer).
- RT Series — a newer option with a cleaner look. Fits 2013–2025.
The Ramp N Clamp needs only 8.5 inches of clearance between the bow eye and the tip of the bow. The compatibility check walks you through measuring it.
The Ramp N Clamp is rated for boats of 6,500 lbs or less. It's made of stainless steel.
Full specifications are on the Ramp N Clamp details page.
Handles
It comes down to when you release the boat:
| If you… | Order the |
|---|---|
| Ever want to release the boat before you back into the water | Short handle (required) |
| Only release once you're in the boat and it's completely floating — and never before backing in | Long handle |
- Short handle: 5", mounts with a bolt and nut.
- Long handle: 2-piece 18" aluminum, mounts front right with a bolt and wing nut.
- Both have a predrilled rope hole under the grip.
Handle options by model: Sport · LGEN2 · RT Series · Model T
Loading & Use
Yes — that's what the Ramp N Clamp is built for. Drive the boat onto the trailer and the spring loaded clamp locks onto the bow eye automatically. No one has to stand at the winch, and you don't have to hold the throttle while you hook up.
That means the motor runs about 1–4 seconds at the roller instead of 10–45, and it makes loading much easier in wind and current.
See the full guide: How to load a boat on a trailer by yourself.
- Light aluminum boats on bunks: about 2–3 ft of bunk showing above the water (1.5–3 ft for aluminum Lunds).
- Heavier fiberglass boats: deeper — about 0.5–2 ft of bunk showing.
- Roller trailers: less water. Back in just until the hull reaches the rear rollers.
If you need real throttle to reach the clamp, your trailer is at the wrong depth: too shallow or too deep. Adjust a little either way and try again.
Add a lubricant to your trailer bunks so the hull slides up more easily. Our Boat Bunk Wax Super Slick Spray is made for this, and you'll find it on our shop page.
Also check your trailer depth. A trailer that's too shallow or too deep can make the boat work harder to reach the clamp.
Yes. The Ramp N Clamp works extremely well on roller trailers as well as bunk trailers.
The surface that touches your boat is polyurethane, which is designed to protect fiberglass. A coat of Boat Bunk Wax on the polyurethane also helps eliminate gelcoat marking (see below).
Yes. Spraying Boat Bunk Wax Super Slick Spray on the clamp's polyurethane adds a barrier between the polyurethane and your boat, makes it slicker so the hull slides in more easily, and helps eliminate gelcoat marking.
Find it in our shop.
- Boat loading videos — solo and two-person loads
- Boat launch videos
- Customer videos
- Customer reviews
Troubleshooting
Follow the step-by-step fix on our troubleshooting page.
Follow the step-by-step fix on our troubleshooting page.
Start by checking your trailer depth — a trailer that's too shallow or too deep is the most common cause. Then work through the rest of the checklist on our troubleshooting page.
This is uncommon, but we have a solution: our strap hook adaptor.
Our troubleshooting page shows how to test the clamp before you head to the ramp.
Orders & Warranty
Yes. Before you call, please read this:
Please don't call to ask which model, which handle, or whether it will work. With thousands of boat and trailer combinations, we don't want to guess and will usually point you back here. You have your boat in front of you, so you can answer these faster with Step 1: the compatibility check and the boat list.
For anything else, you can also email or chat with us.
The Ramp N Clamp has a 2-year warranty covering manufacturing defects.
Full details: Boat2Trailer warranty information.
See our full refund and return policy.
Yes. Replacement parts are available on our shop page.
Unfortunately, no. Every lock is keyed separately so that no one can buy one lock and have access to all of them. Because of that, we're unable to send additional keys.
The Ramp N Clamp is manufactured by Boat2Trailer, a family-owned company in Tea, South Dakota. The clamp is patented and has been on the market since 2012.
Programs
We don't offer a traditional dealer program, but dealers can join our affiliate program.
Yes — through our Boat2Trailer affiliate program.
Yes. See our Support the Troops page for details.
Still need help?
Our team is happy to help with troubleshooting, installation and anything the FAQ doesn't cover.
Chat with us
Use the chat on this page for quick questions about models, handles, troubleshooting or installation.
For the fastest answer, attach a few photos showing:
- The winch stand
- Where the boat sits on the trailer
- The bow eye (remove the cover so the bow and tip are visible)
Call us
Please don't call to ask which model, which handle, or whether it will work. With thousands of boat and trailer combinations, we don't want to guess, and we'll usually point you back to this website. You have your boat in front of you, so you can answer these questions faster and more accurately than we can.
Start with Step 1: the compatibility check, or browse the boat list.
Boat2Trailer · 27084 Kerslake Pl Ste 1, Tea, SD 57064


