Buy Boat Latch Online - Shop Boat2Trailer - Shop Online

Boat2Trailer RT Series Long Handle

boat2trailer — Thu, 16 Jul 2026 16:05:09 +0000

Boat2Trailer RT Series Long Handle. This model is designed specifically to work with a boat that has the EXACT thick aluminum eye in the photos. The compatible aluminum eye is extremely common on newer Ranger aluminum boats and newer Tracker boats. The RT Series Long Handle will come with a custom stainless steel aluminum eye protector. This protector only works on the specific eye we have listed. The protector is designed to PROTECT YOUR ALUMINUM EYE. You DO NOT want steel clamping directly on to an aluminum surface. Without the protector it can cause wear on your eye and damage the integrity of the aluminum over tme. Our protector is patent pending. The protector will come with an aluminum spacer or plug that you will insert into the center of the eye. This plug lines up with our bolt and will create a snug fit for the protector. This reduces the chances of pivoting. There is NO DRILLING NEEDED to install the protector. You will be able to slide the adaptor over your aluminum eye and bolt it on. Did i mention, no drilling is required? Our clamp is designed to lock on to our steel protector and mounts on a 3″ – 4.5″ wide roller bracket. The polyurethane has a wide gap or channel for the protector to pass through. The Boat2Trailer RT Series long handle is commonly used on an aluminum Tracker and aluminum Ranger. It will also work on boats that have the exact aluminum eye in our diagram. The protector is not sold separately for any other use than with the clamp we offer. The protector will not work on our sport model.

Key Materials And Highlights

Fully Stainless Steel.
Fully Stainless Steel Protector.
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle and extension.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer RT Series Long Handle appeared first on Boat2Trailer.

Boat2Trailer RT Series Short Handle

boat2trailer — Thu, 16 Jul 2026 15:50:51 +0000

Boat2Trailer RT Series Short Handle. This model is designed specifically to work with a boat that has the EXACT thick aluminum eye in the photos. The compatible aluminum eye is extremely common on newer Ranger aluminum boats and newer Tracker boats. The RT Series will come with a custom stainless steel aluminum eye protector. This protector only works on the specific eye we have listed. The protector is designed to PROTECT YOUR ALUMINUM EYE. You DO NOT want steel clamping directly on to an aluminum surface. Without the protector it can cause wear on your eye and damage the integrity of the aluminum over tme. Our protector is patent pending. The protector will come with an aluminum spacer or plug that you will insert into the center of the eye. This plug lines up with our bolt and will create a snug fit for the protector. This reduces the chances of pivoting. There is NO DRILLING NEEDED to install the protector. You will be able to slide the adaptor over your aluminum eye and bolt it on. Did i mention, no drilling is required? Our clamp is designed to lock on to our steel protector and mounts on a 3″ – 4.5″ wide roller bracket. The polyurethane has a wide gap or channel for the protector to pass through. The Boat2Trailer RT Series short handle is commonly used on an aluminum Tracker and aluminum Ranger. It will also work on boats that have the exact aluminum eye in our diagram. The protector is not sold separately for any other use than with the clamp we offer. The protector will not work on our sport model.

Key Materials And Highlights

Fully Stainless Steel.
Fully Stainless Steel Protector.
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle.
Automatic Handle AND Manual Handle Included.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer RT Series Short Handle appeared first on Boat2Trailer.

Boat2Trailer LGEN2 Long Handle

boat2trailer — Tue, 05 May 2026 17:06:20 +0000

The Boat2Trailer LGEN2 short handle is designed to mount on a 3′ – 4.5″ wide roller bracket and specifically to work with an aluminum boat that has a thick mounting plate directly above the eye. The polyurethane has a wide gap or channel for the thick plate to pass through. The Model L Gen 2 is for Aluminum LUND, ALUMACRAFT and any other aluminum boat that has this thick mounting plate. The polyurethane is engineered to fit snug around the mounting plate above the eye of the boat. This creates a tight fit between your eye and your boat. When you create a tight fit this allows the least amount of play when loading and traveling. This is extremely important when it comes to protecting the boat. You do NOT want a loose fit or it will create pressure points, bouncing or damaging wear points on the boat. Our design helps to combat this issue and protect your boat.

Key Materials And Highlights

Fully Stainless Steel.
Fully Stainless Steel Adaptor
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle with an extension for a better reach.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer LGEN2 Long Handle appeared first on Boat2Trailer.

Boat2Trailer LGEN2 Short Handle

boat2trailer — Tue, 05 May 2026 14:59:05 +0000

Key Materials And Highlights

Fully Stainless Steel.
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle.
Automatic Handle AND Manual Handle Included.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer LGEN2 Short Handle appeared first on Boat2Trailer.

Boat2Trailer Model T Short Handle

boat2trailer — Sun, 03 May 2026 03:05:04 +0000

The Boat2Trailer Model T Short Handle is designed specifically to work with a boat that has a thick aluminum eye. This model will come with a stainless steel adaptor to PROTECT YOUR ALUMINUM EYE. You DO NOT want steel clamping directly on to an aluminum surface. Over time this will cause wear on your eye and damage the integrity of the aluminum. Our patent pending adaptor protects your eye. Simply slide the adaptor over the aluminum eye and bolt it on. No drilling is required. Our clamp is designed to lock on to our steel adaptor. There are a few patterns on the adaptor to compensate for location and placement of the bolts. The correct holes for each eye will be highlighted in the instructions. The clamp mounts on a 3″ – 4.5″ wide roller bracket. The polyurethane has a wide gap or channel for the adaptor to pass through. The Boat2Trailer Model T Long Handle is for an Aluminum Tracker, Aluminum Ranger, Hewescraft, Alumaweld and any other boats that have the exact aluminum eye in our diagram. The adaptor is not sold separately for any other use than with the clamp we offer.

Key Materials And Highlights

Fully Stainless Steel.
Fully Stainless Steel Adaptor.
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle.
Automatic Handle AND Manual Handle Included.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer Model T Short Handle appeared first on Boat2Trailer.

Boat2Trailer Model T Long Handle

boat2trailer — Sun, 03 May 2026 02:42:25 +0000

The Boat2Trailer Model T Long Handle is designed specifically to work with an aluminum boat that has a thick aluminum eye. The Model T comes with a stainless steel adaptor to PROTECT YOUR ALUMINUM EYE. You DO NOT want steel clamping directly on to an aluminum surface. Over time this will cause wear on your aluminum eye and damage the integrity of the aluminum eye. Our patent pending adaptor protects your eye. Simply slide the adaptor over the aluminum eye and bolt it on. No drilling is required. There are a few patterns on the adaptor to compensate for location and placement of the bolts. The correct holes for each eye will be highlighted in the instructions. The clamp mounts on a 3″ – 4.5″ wide roller bracket. The polyurethane has a wide gap or channel for the adaptor to pass through. The Boat2Trailer Model T Long Handle is for an Aluminum Tracker, Aluminum Ranger, Hewescraft, Alumaweld and any other boats that have the exact aluminum eye in our diagram. The adaptor is not sold separately for any other use than with the clamp we offer.

Key Materials And Highlights

Fully Stainless Steel.
Fully Stainless Steel Adaptor
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle with an extension for a better reach.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer Model T Long Handle appeared first on Boat2Trailer.

Boat2Trailer Sport Long Handle

boat2trailer — Fri, 01 May 2026 21:52:39 +0000

The Boat2Trailer Sport Long Handle is designed to be compatible with boats that have a standard U Bolt mounted directly to the boat and no thick brackets above it. It should work on all compatible FIBERGLASS BOATS and a LARGE number of aluminum boats. Most customers purchase this long handle model for roller trailers and the short handle for bunk trailers. The polyurethane on the clamp is engineered to fit snug around the eye of the boat. The tight fit between your bow eye and your boat will allow the least amount of play when loading and traveling. This is critical when it comes to protecting a fiberglass boat. Having a loose fit or gap, will create pressure points or damaging wear points on the fiberglass. Our design helps to combat this issue and protect your boat.

Key Materials And Highlights

Fully Stainless Steel.
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle with an extension for a better reach.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer Sport Long Handle appeared first on Boat2Trailer.

Boat2Trailer Sport Short Handle

boat2trailer — Fri, 01 May 2026 21:16:31 +0000

The Boat2Trailer Sport Short Handle is designed to work with a boat that has a standard U Bolt mounted directly to the boat and no thick brackets above it. This Sport Model should work on all compatible FIBERGLASS BOATS and a LARGE number of aluminum boats. The polyurethane on the clamp is engineered to fit snug around the eye of the boat. This creates the tightest fit between your eye and your boat. This tight fit design allows the least amount of play when loading and traveling. This design feature is critical when it comes to protecting a fiberglass boat. Having a loose fit or gap, will create pressure points or damaging wear points on the fiberglass. Our design helps to combat this issue and protect your boat.

Key Materials And Highlights

Fully Stainless Steel.
Stoltz Super Roller Polyurethane Protector Material To Protect The Boat.
Rubber Grip Handle.
Automatic Handle AND Manual Handle Included.
Small Wheel On Top To Prevent The Nose From Catching On The Polyurethane Or Handle When Launching.
Nylon Washer On Mounting Bracket To Provide A Smooth Rotation When Pivoting.
Large 7″ Receiving Channel To Help Guide In The Boat When Loading.
Low Profile Design To Help Prevent Displacemnt After Install.
2 Built In Shock Absorbers For Less Stress On The Hull Or Bow Eye During Clamping Or Impact.
2 Year Manufacturing Warranty

The post Boat2Trailer Sport Short Handle appeared first on Boat2Trailer.

Replacement Blue Protectors

boat2trailer — Wed, 22 Jan 2025 21:11:18 +0000

2 Blue protectors. One set of 2. This is ONLY available to replace Ramp N Clamp blue cap protectors. Does not include hardware. If you lost your blue cap Ramp N Clamp protectors, these are the replacements.

The post Replacement Blue Protectors appeared first on Boat2Trailer.

Boat2Trailer Fishing Towel

boat2trailer — Wed, 13 Nov 2024 13:53:58 +0000

Boat2Trailer Fishing Towel. Our fishing towel is made of a “waffle” towel fabric to help break up any dirt when in use and for cleaning. The color of the towel is a Heathered black color with a full size Boat2Trailer logo in the center. The Towel also comes with a sturdy clip that locks. This is nice to clip somewhere in the boat or pant loop for convenience.

The post Boat2Trailer Fishing Towel appeared first on Boat2Trailer.