If your boat it is NOT listed DON’T WORRY just CLICK HERE to make sure it will work. The latch works on SO MANY BOATS there is no way we could list them all.
Most Lund boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Lund boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a Lund? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Alumacraft boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Alumacraft boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Coming Soon
Coming Soon
Customer Photos
Do you have a latch installed on a AlumaCraft? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Crestliner boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Crestliner boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a Crestliner? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most SmokerCraft boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on SmokerCraft boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a SmokerCraft? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Skeeter boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Skeeter boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a Skeeter? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Warrior boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Warrior boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Coming Soon
Coming Soon
Customer Photos
Do you have a latch installed on a Warrior? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Lowe boat trailers can have a 3 1/2″ or larger gap in the roller bracket, but some have a 3″ as you can see in these examples. It is recommended you double check your measurement before ordering,
Customer Photos
Do you have a latch installed on a Lowe? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Chaparal boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Chaparal boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a Chaparal? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Crownline boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Crownline boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a Crownline? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most MasterCraft boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on MasterCraft boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a MasterCraft? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Malibu boats are compatible with the Drotto Latch on Boat2Trailer. The trailer will have a 3″ or a 3 1/2″ or larger gap in the roller bracket. It is recommended you double check your measurement before ordering,
Customer Photos
Do you have a latch installed on a Malibu? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Ranger boats have a trailer that have a 3″ gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Ranger boat and trailer setups. For these examples we recommend the 3″ Model with roller seen here.
Customer Photos
Do you have a latch installed on a Ranger? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Tracker boats have a trailer that have a 3 1/4″ gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Tracker boat and trailer setups. For these examples we recommend the 3″ Model seen here.
Customer Photos
Do you have a latch installed on a Tracker? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Stratos boats have a trailer that have a 3″ gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Stratos boat and trailer setups. For these examples we recommend the 3″ Model with roller seen here.
Coming Soon
Coming Soon
Customer Photos
Do you have a latch installed on a Stratos? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most G3 boats have a trailer that have a 3″ gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on G3 boat and trailer setups. For these examples we recommend the 3″ Model with roller seen here.
Customer Photos
Do you have a latch installed on a G3? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Nitro boats have a trailer that have a 3″ gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Nitro boat and trailer setups. For these examples we recommend the 3″ Model with roller seen here.
Customer Photos
Do you have a latch installed on a Nitro? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most SeaArk boats have a trailer that have a 3″ gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on SeaArk boat and trailer setups. For these examples we recommend the 3″ Model with roller seen here.
Customer Photos
Do you have a latch installed on a SeaArk? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Starcraft boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Starcraft boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a StarCraft? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most Triton boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples and the nose typically drops during launch. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on Triton boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch with roller here.
Customer Photos
Do you have a latch installed on a Triton? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most BassCat boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. Typically the bow does drop when launching so we recommend the roller attachment as well seen here. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on BassCat boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch with roller here.
Customer Photos
Do you have a latch installed on a BassCat? If you wish to share your photo or video please send it to info@boat2trailer.com,
Most NauticStar boats have a trailer that have a 3 1/2″ or larger gap in the roller bracket as you can see in these examples. It is recommended you double check your measurement before ordering if yours does not look like any of these examples, but this is commonly used on NauticStar boat and trailer setups. For these examples we recommend the 3 3/4″ Model Latch here.
Customer Photos
Do you have a latch installed on a NauticStar? If you wish to share your photo or video please send it to info@boat2trailer.com,
If your boat it is NOT listed DON’T WORRY just CLICK HERE to make sure it will work. The latch works on SO MANY BOATS there is no way we could list them all.
