fbpx

boat2trailer shipping

Boat Launch System


Boat Launch System

Boat Launch System – There are many boat launch systems on the market today. The key to finding the best boat launch system is by asking questions like, does the system fit on my boat? How durable is it? How easy is it to use and install? And last how much is it?

Find the arguably highest regarded boat launch system here.

If your looking to purchase the recently released boat launch system on Boat2Trailer.com, let me break down the system for you by answering a few questions.

Does the Boat launch system fit on my boat?

The boat launch system on www.boat2trailer.com is designed to fit boats with a V hull front. It has 2 sizes to choose from a 3″ model and a 3 3/4″ model.

Boat2Trailer-boat-launch-system   The 3″ model of the boat launch system fits v hull boat trailers with an existing 3″ wide bow roller on it. The 3″ model replaces bow rollers that are 3″ in width from the inside measurement of the bracket. If your existing bow roller is larger than 3″ you will need to refer to the 3 3/4″ model of the system. You can see how to measure what size you need by clicking here.

 

Boat2Trailer-boat-launch-system     The 3 3/4″ model of the system fits v hull boat trailers with an existing 3 3/4″ wide bow roller on it. This model replaces bow rollers that are 3 3/4″ – 4″ in width from the inside measurement of the bracket. If your existing bow roller is larger than 3 3/4″ you can easily add a spacer or washer to secure the fit. You can see how to measure what size you need by clicking here.

 

How durable is the Boat Launch System?

Boat Launch SystemThe boat launch system on boat2trailer.com is incredibly durable compared to the rest of the systems on the market. It’s made up of a very heavy gauge steel and coated with your choice of 2 types of coating. A Black Powder or a Zinc. This makes it a very strong system. The Zinc and Black Powder coating is added to help prevent corrosion and rusting on the system.

Install of the Launching System on Boat2Trailer

remove roller from trailer   The install of the boat latch is very easy. You typically just have to remove one bolt which secures your bow roller and replace it with the system on boat2trailer.com. Here is a link to an install video you can refer to.  INSTALL

 

 

Boat Launch System Cost

To purchase the system on Boat2Trailer.com just click the link below.

buy-boat-launch-system-now

Have any Question or Comment?

2 comments on “Boat Launch System

Ken

i have installed my newly purchased boat2trailer system in my garage. After install I cranked the boat up and it did catch the hook. But now I tried to release the hook from the eye hook using the lever and it will not release. Did I do something wrong with the install. Please can you help I want to make sure it is working properly before I take it to the lake

Reply
boat2trailer

Hi Ken, You will see the answer to that question here https://www.boat2trailerhookup.com/drotto-boat-latch-things-to-know/ It is #1 on our “things to know” page. Thanks Ken.

Reply

Leave a Reply

Your email address will not be published. Required fields are marked *

Steven Stacy
Steven Stacy
03:56 29 Jun 20
Works like a dream. As others have mentioned it pulled my Competitor 165 forward a couple of inches but I loosened the winch stand and slid it forward to compensate.
Michael Hatton
Michael Hatton
23:48 28 Jun 20
This a 5 star just on customer service alone. I placed my order late on Saturday afternoon and had a question afterwards. I sent email later that night and had a positive response back on Sunday morning!! WHO DOES THAT?!? I'm counting on the latch working just as well !
Tom Johansen
Tom Johansen
21:50 26 Jun 20
Outstanding product, works as advertised
Rodney Puckett
Rodney Puckett
13:48 24 Jun 20
I fish with my 9 year old son 99% of the time so it is just me launching and loading. However, I had rotator cuff surgery on my dominant arm in March. Trying to reach over and hook up is extremely painful for me and trying to do it standing to the trailer is impossible with my range of motion. I showed this to my wife and she ordered it for Father's Day.

I took the boat out yesterday and installed it. I have a Phoenix Bass Boat with a 4" roller so we had to go with the 3 3/4" version and I added washers to each side so it was centered. The install went smooth and took about 10 minutes. Just as side note if you have a 4" roller you will likely need to used the same bolt that is currently on your trailer's roller. I caught this before the install so it was not a big deal. I got the master lock so the bolt that came with it would not work for sure.

Yesterday was a windy day once we got back from fishing we had some water skiers and strong wind making for challenging loading conditions and this think worked like a champ. It will cut minutes off of launching and loading you boat.
Roy Mccombs
Roy Mccombs
20:26 20 Jun 20
I absolutely love this device. I have had both knees replaced and it was very hard for me to go fishing by myself but this device has given me the freedom I was looking for. I have friends that are talking about getting this device. Thank you Boat2Trailer Drotto Boat Latch.
Perry Arima
Perry Arima
14:20 17 Jun 20
Works awesome on my Alumacraft
Mark Ross
Mark Ross
14:13 17 Jun 20
Only thing that could make it easier to loadout would be a chauffeur! Makes loading out easy peasy.
Larry Schulze
Larry Schulze
13:41 17 Jun 20
Chris Palmer
Chris Palmer
17:40 15 Jun 20
Unbelievably simple, no stress, boat launching and loading!! Should be included with every trailer.
Fred DeMars
Fred DeMars
13:14 11 Jun 20
The latch works as advertised. Would have given it five stars but it set my boat back about 4 inches on the trailer (Lund boat & shorelander trailer). I will have to figure out a bracket for rear tie downs. I have a swing away hitch so can not move my front post foreward. Perhaps Drotto could figure that out & and market them.
Lee Holt
Lee Holt
10:39 11 Jun 20
Awesome Product!! Quality built! Highly recommend
Steve Sizemore
Steve Sizemore
01:45 10 Jun 20
With all of the tech on my boat, this is by far the most efficient, easiest installing and extraordinarily convenient feature on my boat or trailer. 1 bolt install, 3 if you install the handle and has made loading and unloading my boat a joy. Made loading a breeze just this weekend at a busy ramp, in rough water and wind. Buy it, I'd be shocked if you ever regret it.
Ken Olswfski
Ken Olswfski
03:47 29 May 20
I dont know how I went this long without it,since the easy installation ,loading and unloading has never been easier,well built product,customer service was awesome the gentleman I spoke with was very patient to help me decide which unit i needed for my boat
ray bennett
ray bennett
16:35 27 May 20
Absolutely a great product and customer service. I added this for my 18' bow rider and trailer and it works great! Boat2Trailer delivered it on time (early actually) and provided great support when I had a question. Everyone should have this for their boat!
anthony lingerfelt
anthony lingerfelt
14:55 24 May 20
Took a little bit of work to get it installed the way I needed it because of the design of my Stratos trailer. But working great. I wish I had bought it a long time ago. Five stars for sure.